找不到cannot find -lpython3.5m caffe anaconda python3 ubuntu16.04，caffeanaconda,LD -o .bui

找不到cannot find -lpython3.5m caffe anaconda python3 ubuntu16.04，caffeanaconda,LD -o .bui

LD -o .build_release/lib/libcaffe.so.1.0.0
/usr/bin/ld: 找不到 -lpython3.5m
collect2: error: ld returned 1 exit status
Makefile:572: recipe for target ‘.build_release/lib/libcaffe.so.1.0.0‘ failed
make: *** [.build_release/lib/libcaffe.so.1.0.0] Error 1

这里提供另一种解决方法，如果你想用pyhton3,而且是anoconda3那么肯定不能用caffe包中的example.config。

你可能仔细看了config然后删除了pyhton3之前的注释，并且把python2注释了，而且还添加了anaconda的配置，然后你运行，就会出现本错误，你可以更改下把config中的3.5m改成3.5你会发现错误也跟着便，没错，就是因为你放出了python3的配置参数，导致了这个错误。所以你应该把python3注释回去。我的config如下：

## Refer to http://caffe.berkeleyvision.org/installation.html# Contributions simplifying and improving our build system are welcome!# cuDNN acceleration switch (uncomment to build with cuDNN).# USE_CUDNN := 1# CPU-only switch (uncomment to build without GPU support). CPU_ONLY := 1# uncomment to disable IO dependencies and corresponding data layers# USE_OPENCV := 0# USE_LEVELDB := 0# USE_LMDB := 0# uncomment to allow MDB_NOLOCK when reading LMDB files (only if necessary)#    You should not set this flag if you will be reading LMDBs with any#    possibility of simultaneous read and write# ALLOW_LMDB_NOLOCK := 1# Uncomment if you‘re using OpenCV 3# OPENCV_VERSION := 3# To customize your choice of compiler, uncomment and set the following.# N.B. the default for Linux is g++ and the default for OSX is clang++# CUSTOM_CXX := g++# CUDA directory contains bin/ and lib/ directories that we need.CUDA_DIR := /usr/local/cuda# On Ubuntu 14.04, if cuda tools are installed via# "sudo apt-get install nvidia-cuda-toolkit" then use this instead:# CUDA_DIR := /usr# CUDA architecture setting: going with all of them.# For CUDA < 6.0, comment the *_50 through *_61 lines for compatibility.# For CUDA < 8.0, comment the *_60 and *_61 lines for compatibility.# For CUDA >= 9.0, comment the *_20 and *_21 lines for compatibility.CUDA_ARCH := -gencode arch=compute_20,code=sm_20         -gencode arch=compute_20,code=sm_21         -gencode arch=compute_30,code=sm_30         -gencode arch=compute_35,code=sm_35         -gencode arch=compute_50,code=sm_50         -gencode arch=compute_52,code=sm_52         -gencode arch=compute_60,code=sm_60         -gencode arch=compute_61,code=sm_61         -gencode arch=compute_61,code=compute_61# BLAS choice:# atlas for ATLAS (default)# mkl for MKL# open for OpenBlasBLAS := atlas# Custom (MKL/ATLAS/OpenBLAS) include and lib directories.# Leave commented to accept the defaults for your choice of BLAS# (which should work)!# BLAS_INCLUDE := /path/to/your/blas# BLAS_LIB := /path/to/your/blas# Homebrew puts openblas in a directory that is not on the standard search path# BLAS_INCLUDE := $(shell brew --prefix openblas)/include# BLAS_LIB := $(shell brew --prefix openblas)/lib# This is required only if you will compile the matlab interface.# MATLAB directory should contain the mex binary in /bin.# MATLAB_DIR := /usr/local# MATLAB_DIR := /Applications/MATLAB_R2012b.app# NOTE: this is required only if you will compile the python interface.# We need to be able to find Python.h and numpy/arrayobject.h.#PYTHON_INCLUDE := /usr/include/python3.5 \        /usr/lib/python3.5/dist-packages/numpy/core/include# Anaconda Python distribution is quite popular. Include path:# Verify anaconda location, sometimes it‘s in root. ANACONDA_HOME := $(HOME)/anaconda3 PYTHON_INCLUDE := $(ANACONDA_HOME)/include          $(ANACONDA_HOME)/include/python3.5          $(ANACONDA_HOME)/lib/python3.5/site-packages/numpy/core/include# Uncomment to use Python 3 (default is Python 2) #PYTHON_LIBRARIES := boost_python3 python3.5m #PYTHON_INCLUDE := /usr/include/python3.5m \  #               /usr/lib/python3.5/dist-packages/numpy/core/include# We need to be able to find libpythonX.X.so or .dylib.#PYTHON_LIB := /usr/lib PYTHON_LIB := $(ANACONDA_HOME)/lib# Homebrew installs numpy in a non standard path (keg only)# PYTHON_INCLUDE += $(dir $(shell python -c ‘import numpy.core; print(numpy.core.__file__)‘))/include# PYTHON_LIB += $(shell brew --prefix numpy)/lib# Uncomment to support layers written in Python (will link against Python libs) WITH_PYTHON_LAYER := 1# Whatever else you find you need goes here.INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include#INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/include/hdf5/serial/LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib# If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies# INCLUDE_DIRS += $(shell brew --prefix)/include# LIBRARY_DIRS += $(shell brew --prefix)/lib# NCCL acceleration switch (uncomment to build with NCCL)# https://github.com/NVIDIA/nccl (last tested version: v1.2.3-1+cuda8.0)# USE_NCCL := 1# Uncomment to use `pkg-config` to specify OpenCV library paths.# (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.)# USE_PKG_CONFIG := 1# N.B. both build and distribute dirs are cleared on `make clean`BUILD_DIR := buildDISTRIBUTE_DIR := distribute# Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171# DEBUG := 1# The ID of the GPU that ‘make runtest‘ will use to run unit tests.TEST_GPUID := 0# enable pretty build (comment to see full commands)Q ?= @

找不到cannot find -lpython3.5m caffe anaconda python3 ubuntu16.04