python实战第一天-paramiko模块并练习，,操作系统 Ubunt

python实战第一天-paramiko模块并练习，,操作系统 Ubunt

操作系统 Ubuntu 15.10  IDE & editor JetBrains PyCharm 5.0.2 ipython3  Python版本 python-3.4.3

安装paramiko

pip3 install paramiko

jim@jim-virtual-machine:~$ pip3 install paramikoCollecting paramiko  Downloading paramiko-1.16.0-py2.py3-none-any.whl (169kB)    100% |████████████████████████████████| 172kB 1.0MB/s Collecting ecdsa>=0.11 (from paramiko)  Downloading ecdsa-0.13-py2.py3-none-any.whl (86kB)    100% |████████████████████████████████| 90kB 2.3MB/s Collecting pycrypto!=2.4,>=2.1 (from paramiko)  Downloading pycrypto-2.6.1.tar.gz (446kB)    100% |████████████████████████████████| 446kB 162kB/s Installing collected packages: ecdsa, pycrypto, paramiko  Running setup.py install for pycrypto ... doneSuccessfully installed ecdsa-0.13 paramiko-1.16.0 pycrypto-2.6.1

导入paramiko模块

import paramiko

创建ssh连接

ssh = paramiko.SSHClient()ssh.connect("192.168.20.144",port=22,username="jim",password="love19791125") #ssh连接主机 ssh.exec_command("ifconfig") #查看ipconfig Out[130]:  (<paramiko.ChannelFile from <paramiko.Channel 0 (open) window=2097152 -> <paramiko.Transport at 0x980338d0 (cipher aes128-ctr, 128 bits) (active; 1 open channel(s))>>>, <paramiko.ChannelFile from <paramiko.Channel 0 (open) window=2097152 -> <paramiko.Transport at 0x980338d0 (cipher aes128-ctr, 128 bits) (active; 1 open channel(s))>>>, <paramiko.ChannelFile from <paramiko.Channel 0 (open) window=2097152 -> <paramiko.Transport at 0x980338d0 (cipher aes128-ctr, 128 bits) (active; 1 open channel(s))>>>)  ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy()) #先设定接收或处理对方主机发来秘钥的方式stdin,stdout,stderr = ssh.exec_command("ifconfig |grep inet")  #分割数据 stdout.readline()Out[137]: ‘          inet 地址:192.168.20.144  广播:192.168.20.255  掩码:255.255.255.0\n‘ stdout.readlines()Out[146]: [‘          inet 地址:192.168.20.144  广播:192.168.20.255  掩码:255.255.255.0\n‘, ‘          inet6 地址: fe80::20c:29ff:fece:3621/64 Scope:Link\n‘, ‘          inet 地址:127.0.0.1  掩码:255.0.0.0\n‘, ‘          inet6 地址: ::1/128 Scope:Host\n‘]  stdout.read()   #原始数据格式Out[161]: b‘eno16777736 Link encap:\xe4\xbb\xa5\xe5\xa4\xaa\xe7\xbd\x91  \xe7\xa1\xac\xe4\xbb\xb6\xe5\x9c\xb0\xe5\x9d\x80 00:0c:29:ce:36:21  \n          inet \xe5\x9c\xb0\xe5\x9d\x80:192.168.20.144  \xe5\xb9\xbf\xe6\x92\xad:192.168.20.255  \xe6\x8e\xa9\xe7\xa0\x81:255.255.255.0\n  inet6 \xe5\x9c\xb0\xe5\x9d\x80: fe80::20c:29ff:fece:3621/64 Scope:Link\n          UP BROADCAST RUNNING MULTICAST  MTU:1500    \xe8\xb7\x83\xe7\x82\xb9\xe6\x95\xb0:1\n          \xe6\x8e\xa5\xe6\x94\xb6\xe6\x95\xb0\xe6\x8d\xae\xe5\x8c\x85:701920   \xe9\x94\x99\xe8\xaf\xaf:0 \xe4\xb8\xa2\xe5\xbc\x83:0 \xe8\xbf\x87\xe8\xbd\xbd:0 \xe5\xb8\xa7\xe6\x95\xb0:0\n            \xe5\x8f\x91\xe9\x80\x81\xe6\x95\xb0\xe6\x8d\xae\xe5\x8c\x85:40151 \xe9\x94\x99\xe8\xaf\xaf:0 \xe4\xb8\xa2\xe5\xbc\x83:0  \xe8\xbf\x87\xe8\xbd\xbd:0 \xe8\xbd\xbd\xe6\xb3\xa2:0\n          \xe7\xa2\xb0\xe6\x92\x9e:0  \xe5\x8f\x91\xe9\x80\x81\xe9\x98\x9f\xe5\x88\x97\xe9\x95\xbf\xe5\xba\xa6:1000 \n          \xe6\x8e\xa5\xe6\x94\xb6\xe5\xad\x97\xe8\x8a\x82:57283741 (57.2 MB)  \xe5\x8f\x91\xe9\x80\x81\xe5\xad\x97\xe8\x8a\x82:14262542 (14.2 MB)\n\nlo  Link encap:\xe6\x9c\xac\xe5\x9c\xb0\xe7\x8e\xaf\xe5\x9b\x9e  \n          inet \xe5\x9c\xb0\xe5\x9d\x80:127.0.0.1  \xe6\x8e\xa9\xe7\xa0\x81:255.0.0.0\n          inet6 \xe5\x9c\xb0\xe5\x9d\x80: ::1/128 Scope:Host\n          UP LOOPBACK RUNNING  MTU:65536  \xe8\xb7\x83\xe7\x82\xb9\xe6\x95\xb0:1\n            \xe6\x8e\xa5\xe6\x94\xb6\xe6\x95\xb0\xe6\x8d\xae\xe5\x8c\x85:2578 \xe9\x94\x99\xe8\xaf\xaf:0 \xe4\xb8\xa2\xe5\xbc\x83:0 \xe8\xbf\x87\xe8\xbd\xbd:0   \xe5\xb8\xa7\xe6\x95\xb0:0\n          \xe5\x8f\x91\xe9\x80\x81\xe6\x95\xb0\xe6\x8d\xae\xe5\x8c\x85:2578 \xe9\x94\x99\xe8\xaf\xaf:0   \xe4\xb8\xa2\xe5\xbc\x83:0 \xe8\xbf\x87\xe8\xbd\xbd:0 \xe8\xbd\xbd\xe6\xb3\xa2:0\n           \xe7\xa2\xb0\xe6\x92\x9e:0 \xe5\x8f\x91\xe9\x80\x81\xe9\x98\x9f\xe5\x88\x97\xe9\x95\xbf\xe5\xba\xa6:0 \n            \xe6\x8e\xa5\xe6\x94\xb6\xe5\xad\x97\xe8\x8a\x82:497170 (497.1 KB)  \xe5\x8f\x91\xe9\x80\x81\xe5\xad\x97\xe8\x8a\x82:497170 (497.1 KB)\n\n‘stdout.read().decode()      #解码输出                       Out[169]: ‘eno16777736 Link encap:以太网  硬件地址 00:0c:29:ce:36:21  \n          inet 地址:192.168.20.144  广播:192.168.20.255  掩码:255.255.255.0\n          inet6 地址: fe80::20c:29ff:fece:3621/64 Scope:Link\n            UP BROADCAST RUNNING MULTICAST  MTU:1500  跃点数:1\n            接收数据包:702687 错误:0 丢弃:0 过载:0 帧数:0\n            发送数据包:40793 错误:0 丢弃:0 过载:0 载波:0\n            碰撞:0 发送队列长度:1000 \n  接收字节:57343581 (57.3 MB)  发送字节:14402696 (14.4 MB)\n\nlo  Link encap:本地环回  \n          inet 地址:127.0.0.1  掩码:255.0.0.0\n  inet6 地址: ::1/128 Scope:Host\n          UP LOOPBACK RUNNING  MTU:65536  跃点数:1\n            接收数据包:2606 错误:0 丢弃:0 过载:0 帧数:0\n            发送数据包:2606 错误:0 丢弃:0 过载:0 载波:0\n            碰撞:0 发送队列长度:0 \n            接收字节:501890 (501.8 KB)  发送字节:501890 (501.8 KB)

通过ssh下载一个文件到另一个目录下去

ftp.get(‘/etc/pam.conf‘,‘/tmp/pam.paramiko_bak‘) #下载

ls /tmp-rw-rw-r--  1 jim  jim   552  2月 25 18:00 pam.paramiko_bak

通过ssh推送一个文件到一个目录去

ftp.put(‘/etc/hosts‘,‘/tmp/hosts.paramiko_bak‘)  #推送
Out[175]: <SFTPAttributes: [ size=234 uid=1000 gid=1000 mode=0o100664 atime=1456394669 mtime=1456394669 ]> 

定义

res = ftp.put(‘/etc/hosts‘,‘/tmp/hosts.paramiko_bak‘) if res:   print(上传成功)

关闭连接

#关闭连接ftp.close()ssh.close()

python实战第一天-paramiko模块并练习